Special pipe sharped touchpad controlled battery with E-Smart clearomizer or CBD cartridge starter kit: Auto and Manual inhale, 510 thread, touch controlled, 3 colors indicator...:
- 2in1 Switch Modes: Auto Inhale / Manual mode: Touchpad controlled
- 5 touchs On/OFF switch function, click 5 times on screen in 2 seconds to control power on and off.
- Slide up and down to adjust the voltage: High (red indicator), Medium (Green indicator) and Low (Blue indicator)
- Low Battery Warning: red light flashes 10 times and power off
- Short Circuit Protcting: red light flashes 5 times and power off
- Matched with 510 Thread Atomizers under Ø12mm: E-Smart,510-W,CBD cartridge...
- Take off the pipe mouthpiece and connect a decorative ring, Atomizer/CBD cartridge directly.
Characteristics of starter kit:
Size: 31X 148 X 27mm
Weight: 62g (with atomizer)
Content of battery: 400 mAh
Nornal Working Voltage:3.6v-4.2v
Full battery can keep for :about 2-3 hours.
Charging time:2 hours
Standard configuration of starter kit:
Special pipe sharped touchpad controlled battery with E-Smart clearomizer or CBD cartridge:
1 TOKI Touch Controlled Pipe MOD
2 Clearomizers/CBD cartridges
1 Decorative ring
1 Micro USB Cable
1 10ml E-liquid
How to Use TOKI Touch Controlled Pipe MOD battery:
How to use E-Smart clearomizer/510-W ceramic clearomizer/CBD cartridge.
a. How to fill e-liquid to the E-Smart clearomizer/510-W ceramic clearomizer/CBD cartridge:
Step 1: Take out the e-liquid bottle lid;
Step 2: Cut off the top of bottle;
Step 3:Unscrew the inhaler tip from the E-Smart clearomizer/510-W ceramic clearomizer/CBD cartridge.
Step 4:Fill the e-liquid to the clear tank tube.
Using an eliquid bottle or syringe, fill the clear tube by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).
Step 5: Screw the piecemouth tip back into the clear tube again.
* Tips: Please fill the e-liquid slowly, and do not fill completely full of e-liquid, otherwise, it will be leaked into the venting hole. |
