The eGo CE6 cartomizer is exchangeable & detachable clear cartomizer(clearomizer) with round tip, is eGo CE5+ cartomizer, can hold bigger e-liquid capacity:2.4 ml, made as a new design exchangeable clear cartomizer as anyone can easy to check the cartomizer directly, can rechange and wash the coil/wick inside, and if the CE6 cartomizer needs to be cleaned or mechanical problems occur as the cartomizer have been separate as people can diagnosis by himself. So people can only change the question eGo CE6 cartomizer coil head and keep the CE6 cartomizer clean which likes the new one. CE6 cartomizer is the latest Clearomizer designed to work with eGo Series batteries:
1) Easy to fill the e-liquid. Just take off the CE6 cartomizer inhaler tip, fill the e-liquid, and then screw back the inhaler tip onto the eGo CE6 cartomizer.
2) Bigger huge capacity, eGo ce6 cartomizer can hold about 2.4 ml of E-liquid.
3) Fits nicely on an eGo giving a clean finished look.
4) With scale on the eGo CE6 transparent clearomizer, you can see how much nicotine you inhaled.
5) Longer wicks for more consistent flow of e-liquid to the coil in any position
6) The accessories are separable,this makes it easy to replace, more convenient and economical E-cigarette by using eGo CE6 cartomizer changeable coil head and clear tube.
7) No burning, no leaking. Very large vapor.
8) Work with all of eGo Series batteries.
An eGo-CE6 cartomizer set (Round tip) includes:
A CE6 cartomizer set includes:
1 CE6 cartomizer tip
1 CE6 cartomizer detachable tube (2.4ml)
1 CE5/CE6 cartomizer coil head
1 CE5/CE6 cartomizer base
Characteristics:
Resistance: 3.0 Ohms(Normal resistance), 2.0 Ohms (Low reistance)
Diameter: 14mm
Length: 80.5mm (with tip)
Weight: 21.5g
E-liquid content:about 2.4ml
Mouthfuls keep: about 540 mouthfuls=33pcs ordinary cigarettes (16 mouthfuls of ordinary cigarette)
What e-cigarette batteries can be used in this eGo CE6 cartomizer?
eGo CE5 cartomizer can be compatible with all eGo series batteries (eGo battery, eGo MEGA battery, eGo LCD battery, eGo LCD MEGA battery, eGo USB passthrough battery)
How to change the coil head on eGo CE6 cartomizer(CE6 Clearomizer):
Step 1: Unscrew the eGo CE6 cartomizer tube from eGo CE6 cartomizer base.
Step 2: Unscrew the eGo CE6 cartomizer coil head from the top of the base assembly.
Step3: Screw the new eGo CE6 cartomizer coil head into the CE6 cartomizer base again;
Step4: Screw the CE6 cartomizer tube back into the eGo CE6 cartomizer base.
How to fill e-liquid to the eGo CE6 cartomizer(CE6 clearomizer):
Step 1: Take out the e-liquid bottle lid;
Step 2: Cut off the top of bottle;
Step 3: Unscrew the CE6 cartomizer tip from the CE6 cartomizer tube.
Step 4: Fill the e-liquid to the CE6 cartomizer.
Using an eliquid bottle or syringe, fill the CE6 cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).
Step 5: Screw the eGo CE6 cartomizer tip back into the CE6 cartomizer tube(do not screw too tightly).
|
