Choose Language:
Japanese Korean Spanish Russian German French Portuguese Arabic Italian
Order status    My Account
· e-liquid 10ml/20ml/35ml
· e-liquid 50ml/200ml/500ml
· e-liquid 5ml Samples Pack
· Nicotine Salt e-liquid >
· DIY base/nicotine/flavor..>
POD Vape Device Series
· Rechargeable Plat POD e-cig>
· Disposable Plat POD e-cig>
E-Smart e-cig (Ø11mm)
· E-Smart/BCC/TOKI ecig kit>
· E-Smart/BCC Clearomizer >
· E-Smart Battery/Charger
MOD big e-cig (Ø22mm)
· MOD+Atomizer e-cig kit >
· Cylinder|Box|Mech. MOD >
· MEGA Clearomizers|Tank >
· Battery|Charger|Acces.. >
E-Pipe e-cig series
· F-30 E-Pipe Kit/Accessories
· K1000Plus E-Pipe Kit/Accessories
· TOKI Touchpad E-Pipe/Accessories
eGo e-cig series (Ø14)
· eGo/USB/LCD/V.V battery >
· eGo Charger(AC,USB,Car...)
· eGo Other Accessories >
· # CE4/CE5/CE6 e-cig kit >
· CE4/CE5/CE6 Cartomizer>
· # Mini Protank 3 e-cig kit >
· Mini Protank 3 Clearomizer
· # eGo H2 e-cig kit
· eGo H2 Clearomizer
· # eGo-W/eGo-T e-cig Kit>
· eGo-W/eGo-T Atomizer >
· # New eGo+ e-cig kit
· New eGo+ Atomizer>
Mini e cig-BE510 (Ø9)
· BE510/510-W/510C kit
· 510 Atomizer|Clearomizer>
· BE510 Battery/Charger >
Mini eCig-901/103 (Ø9)
· BE901 e-cig kit
· 901 Atomizer|cartridge >
· 901 Battery/Charger/Other>
· 103/BE103C e-cig kit
· 103 Atomizer/Cartridge >
· BE103 Battery/Charger >
Mini ecig-BE401(Ø8.5)
· Mini e-cigarette-BE401 kit
· BE401 Atomizer/Cartridge
· BE401 Battery/Charger >
Universal Accessories
· Case/Bag/Lanyard/Holder>
· Universal Charger/Power
· Injector/Empty bottle/cartridges
· Tip/inhaler/mouthpiece
· Rubber/wick/cotton/wire
Old/Other Products
· Old models you may need>
· Decompression products >

How to use KORE Sub-Ohms tank clearomizer  

Summary: Introduction of KORE sub ohm Adjustable Airflow Tank Clearomizer; accessories of Sub ohm tank Atomizer; the exploded view of sub ohm tank; How to assembly sub ohm tank clearomizer; How to refill e-liquid to sub ohm tank; How to adjust the KORE sub ohm tank airflow; How to clean sub ohm tank clearomizer; and what notices of the sub ohm tank.


Instruction: The KORE Sub-Ohm tank clearomizer's innovative fully adjustable TOP AIR INTAKE design is 100% leak-free and allows maximum filling capacity. The sub ohm tank/clearomizers feature replaceable coils heads that can be vaped at less than 1 ohm, the various types of replacement coils are available to best suit your needs. These sub-ohm coils are built with 100% USA made resistance wires and organic cotton for enhanced vapor production and a cleaner, more flavorful vape. The KORE design is very easy to maintain, carry, and refill.

In order to be able to use these coils, you will need a device that fires down to the ohm level of the coil you intend to use. So if you want to use the 0.5ohm coils you will need a high powered device capable of firing down to 0.5ohm. Check the specs of your device first before you purchase yourself a sub ohm tank, as you might need to upgrade your device as well. Box mods work particularly well with the new sub ohm tanks.




KORE Sub-Ohm tank clearomizer feature


1. 2 air-inflow holes top adjustible airflow control, no leaking easy to refill, can control airflow as you like.
2. Big Size: Ø22mm, Pyrex glass tube, big capacity 3.5ml.
3. Ni-200 0.2ohm, 0.5ohm, 1.0ohm optional, work with 7 to 200 Watts
4. Unique e-liquid and airflow patch separate technology, 100% free leakage
5. fill e liquid from bottom of the clearomizer, avoid any leakage.
6. 100% USA made resistance wire, 100% organic cotton, more healthy and performs better.
7. Glue Free: All parts are replaceable.


Packaging and Exploded View:

KORE Sub-Ohm tank clearomizer pack


A KORE Sub-Ohm tank clearomizer kit includes:

1 Pyyrex Glass Tip
1 KORE Sub-Ohm Tank Body
2 KORE Sub ohm Coil Heads
1 KORE Sub-Ohm Tank Bottom Base


Resistance: BTC(Bottom Turbine Coil) Ni-200 0.2Ω ,0.5Ω, 1.0Ω, optional, work with 7 to 200 Watts
Diameter: 22mm
Length: 74mm (with tip)
Net weight: 59g
Material: Body: 304 stainless steel, tank tube: Pyrex glass, Coil head: 100% USA made resistance wire, Cotton: 100% organic cotton, more healthy and
performs better
2 faced airflow valves: top adjustible airflow control, no leaking easy to refill, can control airflow as you like
E-liquid capacity:about 3.5ml

How to assembly KORE Sub-Ohm tank:


1: Screw the Airflow Adjustemnt Base off the KORE Sub-Ohm tank body.

(Keep each parts of KORE Sub-Ohm tank Tank still tightly!)

2: Screw the Coil Head into the bottom Base.

(Make sure the Coil Head is snugged down hand tight).

3: Snugly screw the KORE Sub-Ohm tank body to the bottom Base.


How to fill e-liquid to the KORE Sub-Ohm tank:


1: Screw the Airflow Adjustemnt Base off the KORE sub-ohm tank body.

(Tips: the Sub ohm Coil Head may be loosed with the Bottom Base, if so, please re-screw it again)

2: Fill E-liquid into the space between the Stainless Tube and the center metal tube.

(DO NOT over fill or get e-liquid into the center shaft.)

3: Screw the Airflow Adjustemnt Base onto the KORE Sub-Ohm tank body again.


how to refill the e-liquid to Kore


How to Aajust KORE Sub-Ohm tank Airflow:


The airflow system on the KORE sub ohm system tank has 4 holes:4*3SQMM=12SQMM intake holes, which provides plenty of air to the coils. The airflow system is easy to change and slides smoothly into place. However when fully open, which is what we prefer, the airflow makes a lot of noise and whistles quite a bit, which was a little bit annoying. You can reduce the noise slightly by closing the airflow somewhat.


Top intake adjustible airflow control


How to Clean KORE Sub-Ohm tank:


When necessary, clean the components (except the KORE sub ohm coil head) by washing with clean water, and air-drying the components.


Tips/Suggestion of the KORE Sub-Ohm tank:


1. In order to have a wonderful vaping, we strongly suggest that let the e liquid absorbed fully.( soak around 30 seconds to 40 seconds)
2. Before vaping,we strongly suggest to use around 15W first.
3. Ni-200 BTC 0.2 ohm work with 50W to 200W; BTC 0.5 ohm work with 15W to 35W; BTC 1.0 ohm work with 7W to 20W


A Few Things You Should Know About Sub Ohm Vaping:


1) Have a good understanding of Voltage, Resistance, Power, and Current with regards to vaping. This seems overwhelming at first and written in a foreign language but you will get the hang of it.

2) You will need the right vape equipment, which is a battery with a high continuous discharge. Cheap generic batteries, even though they are the correct dimensions, will not do the job. Go for a samsung AW, or sony battery capable of reaching these levels. If you buy replaceable batteries, then a smart charger will also be wise. Next you will require an ohm reader. This is so, so important. Do not just try it see if it works, do not guess, there so cheap and easy to use. Occasionally eCigs have ohm readers built in, so you are able to read resistance levels without an ohm reader. Then just a case of adequate wire, wool, and a decent RBA.

3) You make a coil, test a coil, and its fine. But it doesn’t always stay that way. Make regular checks with your ohm reader, change batteries regularly, and if you notice your eCig getting warm when you are not using it, chances are the coil has produced a short circuit somewhere and is drawing juice from your battery, basically being “stuck on”.


Reasons why Sub Ohm Tanks might not be for you

Despite sub ohm tanks being all the rage these days, there are a few good reasons you might not enjoy using one.

--Firstly if you don’t want massive clouds of vapor and want to stealth vape, then sub ohm tanks are most definitely not for you.

--Secondly if you are looking for a mouth to lung style inhale like you would get from smaller clearomizers, then sub ohm tanks won’t be for you. Sub ohm tanks have air flow options, but are best used with wide air flow. When you restrict the air flow the vapor tends to get very hot as the coil isn’t receiving enough air flow. This means you will need to direct lung inhale which might not be for everyone.

--Thirdly, sub ohm tanks will get through a lot of e-liquid because of the amount of vapor they produce. This means you will get through more nicotine, so be sure to use an e-liquid with less nicotine in it. We use 0.3mg or 0mg when we vape on the sub ohm tanks. If you don’t want to use a lot of e-juice, I wouldn’t recommend using sub ohm tanks.

--Lastly the sub ohm tanks are not tiny with the majority being around 22mm. This isn’t great for those who are looking for something very portable and lightweight.


Do bear these points in mind before you purchase your first sub ohm clearomizer as they might not be for everyone. We use them everyone now and then, but for us they aren’t our all day vape because of the clouds and amount of e-juice they get through. However, going back to other tanks you realise just how good the flavor is, on the sub ohm tanks. That is a big reason why people decide to purchase them.

Hot products
F30 Sub-ohm Tank Clearomizer
$ 10.95
F-30 30W Variable Voltage/Wattag Pipe MOD
$ 23.95
F-30 30W E-Pipe Starter kit
$ 38.95
MELO III Mini Tank
$ 4.95
K1000 Plus 30W E-Pipe Starter kit
$ 35.95
e-liquid 20ml
$ 4.15
e-liquid 35ml
$ 6.45
e-liquid 50ml
$ 8.15